Cubicles

Our Used Cubicles are Eco-reconditioned

We take as-is workstations, inventory them, and work with you to fit your specific need.  We use environmentally conscious processes to professionally clean every surface, touch-up where we can, add storage rails and make sure that you have working keys and locks.  We believe in setting realistic expectations.  Although we do our best to remove any dings, scratches, blemishes in stains, this is still pre-owned office furniture.  Size and finish selection is limited to the inventories available for purchase and some use may be evident. 

If you still have questions about workstations check out our used cubicle tip sheet.  Our used cubicle inventory is always changing so please use the request for quote section below or contact us to get a complete listing of our currently available workstations.

 

Narrow Your Results

Manufacturer

Series

Size

Quantity Available

Clear Filters
 

Sort by

 

W1906 - Remanufactured Steelcase 9000 Cubicle

These Steelcase 9000 cubicles are fully remanufactured to your specifications.  The cubicle shown is a 70x70, 65" high on the spine winging down to 53" and then to 42".  There is a 30" wide overhead storage bin with lock and a 42" wide half height shelf.  There is a box/box/file pedestal and a file/file pedestal.  The worksurface configuration is a 24x72x42x24 extended corner with a 24x30 wing.  These cubicles can be configured to fit your specific size, height and color schemes.

Quantity Available:1000

Manufacturer:Steelcase

W6088 - Steelcase Avenir Workstations - Remanufactured

These Steelcase Avenir workstations are available in any color or laminate from our design library.

65"H Fabric panels with glass stackers

Left work surface: 42"L x 30"D with file/file pedestal

Right work surface: 60:L x 30"D with box/box/file pedestal 

Corner work surface: 42" x 42" height adjustable sit/stand

Total work surface: 84" x 102" 

Two overhead storage bins with under light

Powered grommet

Quantity Available:1000

Manufacturer:Steelcase

W6089 - Steelcase Avenir Workstation - Remanufactured

These Steelcase Avenir workstations are available in any color or laminate from our design library.

65"H Fabric panels 

Left work surface: 30"L x 24"D with file/file pedestal

Right work surface: 42"L x 24"D with box/box/file pedestal 

Corner work surface: 42" x 42"

Total work surface: 72" x 84" 

One overhead storage bin with under light

Powered grommet

Quantity Available:1000

Manufacturer:Steelcase

W6090 - Steelcase Avenir Workstations - Remanufactured

These Steelcase Avenir workstations are available in any color or laminate from our design library.

65"H Fabric panels, 52"H with glass stackers

Left work surface: 48"L x 24"D with file/file pedestal

Right work surface: 72"L x 24"D with box/box/file pedestal 

Total work surface: 72" x 72" 

One overhead storage Shelf 

Powered grommet

Quantity Available:1000

Manufacturer:Steelcase

B6007 - Steelcase Frame 1 Benching Stations

These Steelcase Frame 1 Benching stations measure 30" x 60", the surface is 3/4" thick.  Each seat includes a mobile cushion top pedestal with green fabric.  The stations are powered with 3+1 8 wire power. These benching stations were originally configured in (16) pods of six and (2) pods of eight.

Quantity Available:112

Manufacturer:Steelcase

Series:Frame 1

W6086 - Herman Miller AO3 Workstations

These AO3 cubicles measure 6' x 6' the panels are 48" tall and powered with 8 wire power.  They are shared workstations configured in bullpens.  Each workstation is comprised of:

  • 3' corner worksurface
  • 3' wing worksurface
  • 24" x 72" shared worksurface
  • B/B/F pedestal
  • shared 36" two drawer lateral file
  • 36" shelf

There are two different fabrics on the panels which are shown in the photographs below, the aisle panel and connector are one pattern and the remaining panels have the second fabric.  The paint is medium tone, the laminate is (LU).  These cubicles must be sold together and are priced for (2) seats.

Quantity Available:88

Manufacturer:Herman Miller

Series:AO3

Size:6x6

W6095A - Steelcase Montage Workstations

These Steelcase Montage cubicles measure 5' x 4', the panels are 38" tall along the spine, 45" tall on the aisle and the divider panels are 30" tall.  The panels are powered on the spine.  Each workstations consists of:

  • 60" x 30" worksurface
  • 24" F/F pedestal with a 15" x 24" worksurface

These workstations were originally configured in pods of fourteen.

Quantity Available:81

Manufacturer:Steelcase

Series:Montage

W6091A - Steelcase Workstations

These Steelcase Avenir workstations measure 6' x 8', the panels are 53" tall and powered with P-4 Power.  Each cubicle is comprised of:

  • 24' x 48"x 72" x 24" extended corner worksurface
  • 24" x 48" return worksurface
  • B/B/F pedestal
  • F/F pedestal

The paint on these cubes is Steelcase finish code 4795, Tantalum and the fabric is Y088, Peanut.

Quantity Available:79

Manufacturer:Steelcase

Series:Avenir

Size:6x8

W6096A - Knoll Morrison Cubes

These Knoll Morrison workstations measure 6' x 8', the panels are 48" tall and powered on the spine with 8 wire power.  Each cubicle consists of:

  • 24" x 72" x 48" extended corner worksurface
  • 24" x 48" wing worksurface

These cubes must be sold in bullpen configuration.  The workstations were previously remanufactured, the fabric is Burch Chain Link Cocoa, the paint is Beige and the laminate is Sand.

Quantity Available:60

Manufacturer:Knoll

Series:Morrison

Size:6x8

W6097 - Haworth Premise Enhanced Workstations

These Haworth Premise enhanced workstations measure 6' x 7', the panels are 42" tall and powered on the spine with 8 wire power.  Each cubicle is comprised of:

  • 42" x 24" corner worksurface
  • 24" x 30" worksurface
  • 24" x 42" worksurface
  • B/B/F pedestal
  • F/F pedestal

The Paint on this product is TR-AK Chalk, the fabric is C1-AM, the laminate is H-21 and the edge is HP-AA.  Please note that these cubicles were originally configured in bullpens and must be sold that way.  Eleven of the workstations have a 53" aisle panel for added privacy.  

 

Quantity Available:50

Manufacturer:Haworth

Series:Premise Enhanced

Size:6x7

W6075 - Steelcase Montage Workstations

These Steelcase Montage cubicles measure 7 1/2' x 5 1/2', the panels are 46" tall and powered on the spine with beltline and baseline power.  Each workstations consists of:

  • 48" x 24" wing worksurface
  • 42" x 24" corner worksurface
  • 24" x 24" wing worksurface
  • 30" two drawer lateral file
  • B/B/F pedestal

The paint is Steelcase finish code 4788, Gold Dust Mica.  The laminate is Steelcase finish code 2854, Velium Fiber and the wood trim is 3422, Medium Cherry.  These workstations were orginally configured in (7) runs of two, (5) runs of three, (1) run of four, (14) pods of four, (5) pods of six and (2) pods of eight.

Quantity Available:37

Manufacturer:Steelcase

Series:Montage

W6098A - Haworth Compose Workstations

These Haworth Compose workstations measure 7 1/2' x 7' and the panels are 49" tall.  The spine panels are powered and the base plates are 8" high.  Each workstations is comprised of: 

  • 60" x 42" x 24" extended corner worksurface
  • 48" x 24" worksurface
  • 60" x 24" worksurface
  • 30" two drawer lateral file
  • 24" storage cabinet

These workstations were originally configured in (11) pods of four and (2) runs of two.  The fabric is R6-DRX, the paint is Metallic Silver TR-LE and the laminate is H-AC, HP-AC.  The outside of the panels have White Oak AAL.

Quantity Available:32

Manufacturer:Haworth

Series:Compose