Our Used Cubicles are Eco-reconditioned

We take as-is workstations, inventory them, and work with you to fit your specific need.  We use environmentally conscious processes to professionally clean every surface, touch-up where we can, add storage rails and make sure that you have working keys and locks.  We believe in setting realistic expectations.  Although we do our best to remove any dings, scratches, blemishes in stains, this is still pre-owned office furniture.  Size and finish selection is limited to the inventories available for purchase and some use may be evident. 

If you still have questions about workstations check out our used cubicle tip sheet.  Our used cubicle inventory is always changing so please use the request for quote section below or contact us to get a complete listing of our currently available workstations.

Narrow Your Results





Quantity Available

Showing items per page Sorting by
Haworth Workstations
Additional photos available

W3977 — Haworth Premise Cubicles

These Haworth Premise V1 workstations measure 6' x 7', the panels are powered with 8 wire power on the spline and first wing panel.  Each workstation consists of:

  • 30" x 72" worksurface
  • 24" x 54" wing worksurface
  • (2) 36" overhead bins
  • B/B/F pedestal
  • F/F pedestal

The paint on these cubes is Haworth TR-S, Sand.  The laminate is also Haworth Sand.  The fabric is Haworth finish code FL-AJ on the spline and SF-AA on the wing panels.

Manufacturer: Haworth
Series: Premise
Size: 6x7
Quantity Available: 107

Knoll Workstations
Additional photos available

W3985 — Knoll Cubicles

These Knoll workstations are a mix of Currents and Morrison, the cubicle is 6' x 6' and the panels are 64" tall.  Each workstation contains a 72" reuter bin with a light and two pedestals (mix of mobile B/F, B/B/F and F/F pedestals).  The paint is Flint, the laminate is light grey and the fabric is Resolution 280/5 Taupe Pearl.  The panels are powered with 10 wire, 6 circuit power and A, B, X outlets are available.


Manufacturer: Knoll
Series: Currents/Morrison
Size: 6x6
Quantity Available: 105

Etho Workstations
Additional photos available

W3760 — Herman Miller Etho Cubicles

These Herman Miller workstations are in impeccable condition, they were originally purchased in April of 2011.  Each cubicle measures 6' x 6' and the panels are 46" tall.  The glass stackers are on the end of the pod runs only.  The panels are powered with 8 wire 4 circuit power.  Each workstation consists of:

  • 24" x 72" worksurface
  • 24" x 48" worksurface
  • B/B/F pedestal
  • F/F pedestal 
  • 36" 1/2  height shelf
  • 48" rail tile

These cubicles were originally configured in (3) pods of 10, (2) pods of 9, (7) pods of 6, (2) pods of 12, (1) pod of 11, (1) pod of 7, (1) pod of 16, (1) pod of 15, (1) pod of 18, (2) runs of 2, and a single.  Please note that the end of run panels have a perforated surface and that there are no aisle panels.

Manufacturer: Herman Miller
Series: Ethospace
Size: 6x6
Quantity Available: 103

Additional photos available

W3850 — Herman Miller Ethospace Cubicles

These Herman Miller Ethospace cubicles measure 6' x 6', the panels are 46" tall and powered with beltline power.  Each workstation consists of:

  • (1) 24" x 36" corner
  • (2) 24" x 36" wings
  • (1) BBF ped
  • (1) FF ped

The top caps and finished ends are Cherry.  Please note that there are no aisle panels.  All product was originally configured in "bullpens" with the majority consisting of (8) workstations.

Manufacturer: Herman Miller
Series: Ethospace
Size: 6x6
Quantity Available: 94

Additional photos available

W3913 — Herman Miller Ethospace Cubes

These Herman Miller Ethospace workstations measure 3' x 5 1/2', the panels are 38" tall and powered on the spline with 8 wire 4 circuit.  Each workstations consists of:

  • 36" x 66" worksurface
  • 20" "V" Style free standing B/B/F pedestal

The fabric on the interior of the panels is Herman Miller finish code 2M06, Silkworm Jasmine.  The fabric on the exterior of the panels is 2M06, Silkworm Saffron.  The trim is Cherry wood and the laminate is 1X, Vanilla Fiber.  These cubes were originally configured in (11) pods of six, (5) pods of eight, and (1) run of three.  Please note that these workstations come with a mix of power poles and BPI's, this is illustrated in the sixth photograph.




Manufacturer: Herman Miller
Series: Ethospace
Size: Telemarketing
Quantity Available: 85

Additional photos available

W3844A — Steelcase Avenir Cubes

These Steelcase Avenir cubicles measure 6' x 6', the panels are 53" tall.  The panels are powered with 8 wire power.  Each workstation consists of:

  • 42" x 24" corner worksurface with an adjustable keyboard platform
  • (2) 30" x 24" wing worksurfaces
  • B/B/F pedestal
  • F/F pedestal 
  • 30" shelf (not shown in the photograph)

The fabric on the panels is "That Straw Stuff" by Designtex 6314-102, the paint is Warm Brown 1. The laminate is 2766 Warm Brown 1.  These workstations must be configured in bullpens and sold in pods of eight.   Please note that the worksurfaces have grommets for wire management, but the covers are not available.

Manufacturer: Steelcase
Series: Avenir
Size: 6x6
Quantity Available: 82

Additional photos available

w3624 — Innovant Maple Veneer Workstations

These innovant benching stations are double stations.  The wing panels are 41 3/4" tall without the glass stackers and 49" tall with the glass.   Each seat consists of:

  • 30" x 78" mains surface which is made up of  (1)18" x 78" surface, (3) 8" x 25 3/4" bread boards and (1) 4" x 78" metal trough
  • 15 1/2" B/B/F pedestal
  • 30" two drawer lateral file with a 18" x 30" attached top
  • 20" two shelf bookcase which is attached to the file, please note that this has no top, it sits under the main surface

Please note that the monitor arms are available for an additional charge.


Manufacturer: Innovant
Quantity Available: 64

Steelcase Cubicles
Additional photos available

W3975 — Steelcase 9000 Workstations

These Steelcase 900 workstations measure 6' x 6', the panels are 48" tall and powered with P4 8 wire power on the spline.  Each cubicle consists of:

  • 25" x 42" corner worksurface
  • 25" x 30" wing worksurface
  • B/B/F pedestal
  • F/F pedestal

The laminate is Steelcase finish code 2754, Steelcase Solid White.  The paint is Steelcase finish code 4682, Grey Value #1.  Lastly the fabric is Steelcase 5369, Regatta Blue Value #1.

Manufacturer: Steelcase
Series: 9000
Size: 6x6
Quantity Available: 48

Steelcase Workstations
Additional photos available

W3741A — Steelcase Montage Workstations

These Steelcase Montage cubicles measure 7' x 5' with power down the spline and first panel.  The height of the panels as shown are 75" on the spline and first panel, then winging down.  Please note that these panels are comprised of both 10" and 20" stackers so the height could be adjusted to  45" tall.  Each station consists of: MUST BE SOLD IN PODS.

  • 48" x 60" extended corner
  • (1) 24" x 36" wing worksurfaces
  • 48" overhead bin
  • 36" overhead bin
  • B/B/F pedestal
  • F/F pedestal

The worksurfaces included with these workstations are Elective Elements worksurfaces.  The laminate is Steelcase 2850, Vanadium Fiber.  The paint is Steelcase 4788, Gold Dust.  Lastly, the fabric is Steelcase G001, Fresco Sandrift.



Manufacturer: Steelcase
Series: Montage
Size: Other
Quantity Available: 43



Charlotte, NC
P (704) 521-9328
F (888) 268-2120

Chicago, IL
Michigan City, IN 46360
P (219) 879-3665
F (219) 872-7665

Holyoke, MA
56 Canal Street
Holyoke, MA, 01040
P (413) 315-6777
F (413) 315-6278

New York, NY
80 Wall Street
Suite 814
New York, NY 10005
P (212) 871-0055
F (212) 871-0082

Philadelphia, PA
P (856) 786-2229
F (856) 786-2011