Our Used Cubicles are Eco-reconditioned

We take as-is workstations, inventory them, and work with you to fit your specific need.  We use environmentally conscious processes to professionally clean every surface, touch-up where we can, add storage rails and make sure that you have working keys and locks.  We believe in setting realistic expectations.  Although we do our best to remove any dings, scratches, blemishes in stains, this is still pre-owned office furniture.  Size and finish selection is limited to the inventories available for purchase and some use may be evident. 

If you still have questions about workstations check out our used cubicle tip sheet.  Our used cubicle inventory is always changing so please use the request for quote section below or contact us to get a complete listing of our currently available workstations.

Narrow Your Results





Quantity Available

Showing items per page Sorting by

Additional photos available

W3903 — Haworth Premise Cubicles

These Haworth Premise workstations measure 6' x 6', the panels are 48" tall and powered along the spline.  Each workstation consists of:

  • (2) 36" x 24" worksurface
  • 36" x 36' corner worksurface
  • B/B/F pedestal
  • F/F pedestal

Please note that (10) of these workstations have one wing with panels measuring 38" tall as they were orginally configured along a window bank.

Manufacturer: Haworth
Series: Premise
Size: 6x6
Quantity Available: 48

Additional photos available

W3850 — Herman Miller Ethospace Cubicles

These Herman Miller Ethospace cubicles measure 6' x 6', the panels are 54" tall and powered with beltline power.  Each workstation consists of:

  • (1) 24" x 36" corner
  • (2) 24" x 36" wings
  • (1) BBF ped
  • (1) FF ped

The top caps and finished ends are Cherry.  Please note that there are no aisle panels.  All product was originally configured in "bullpens" with (10) pods of 6, (2) runs of 2, and (1) single.  All product must be sold in pods.

Manufacturer: Herman Miller
Series: Ethospace
Size: 6x6
Quantity Available: 44

Steelcase Workstations
Additional photos available

W3741A — Steelcase Montage Workstations

These Steelcase Montage cubicles measure 7' x 5' with power down the spline and first panel.  The height of the panels as shown are 75" on the spline and first panel, then winging down.  Please note that these panels are comprised of both 10" and 20" stackers so the height could be adjusted to  45" tall.  Each station consists of: MUST BE SOLD IN PODS.

  • 48" x 60" extended corner
  • (1) 24" x 36" wing worksurfaces
  • 48" overhead bin
  • 36" overhead bin
  • B/B/F pedestal
  • F/F pedestal

The worksurfaces included with these workstations are Elective Elements worksurfaces.  The laminate is Steelcase 2850, Vanadium Fiber.  The paint is Steelcase 4788, Gold Dust.  Lastly, the fabric is Steelcase G001, Fresco Sandrift.



Manufacturer: Steelcase
Series: Montage
Size: Other
Quantity Available: 44

Additional photos available

W3930A — Knoll Workstations

These Knoll workstations have Morrison panels and Reff worksurfaces and pedestals.  The panels are 56" tall and the workstation measures 7' x 7'.  The panels are powered on the spline.  Each cubicle consists of:

  • 42" x 30" corner worksurface
  • (2) 42" x 30'' wing worksurfaces
  • non-locking B/B/F pedestal
  • non-locking F/F pedestal

The paint is light metallic grey, the laminate is light grey and the fabric is W808-4 Litchfield, Ice.

Manufacturer: Knoll/Reff
Size: 7x7
Quantity Available: 33

Herman Miller Workstations
Additional photos available

W3762 — Herman Miller Ethospace Workstations

These Herman Miller Ethospace cubes measure 6 1/2' x 6 1/2', the panels are 54" tall.  The cubicles are powered with 8 wire beltline power.  Each workstation consists of:

  • 24" x 36" corner worksurface
  • 24" x 42" wing worksurface
  • (2) 24" F/F pedestal
  • center drawer


The cubes were originally configured in (4) pods of 8.  The pedestals are painted innertone light and the tops caps and finished ends are painted medium tone.  The laminate is innertone light as well.  The fabric is 4X04 Tressel, Froth.  Please note that the shelf is not available.  

Manufacturer: Herman Miller
Series: Ethospace
Quantity Available: 32

Knoll Workstations

W3825A — Knoll Used Cubicles

These Knoll cubicles have Currents panels on the spline and Reff on the aisle.  The Currents panels measure 54" tall and are powered, the Reff panels measure 49" and are non-powered.  Each workstation consists of:

  • 24" x 48" x 72" extended corner worksurface
  • 24" x 48" wing worksurface
  • 36" two drawer lateral file
  • 48" reuter bin
  • B/B/F pedestal

These are handed stations and we currently have (12) left and (12) rights available. These workstations must be sold in PODS.

Manufacturer: Knoll
Size: 6x8
Quantity Available: 24

Additional photos available

W3898 — Haworth Premise Workstations

These Haworth Premise workstations measure 6 1/2' x 7 1/2', the panels are 48" tall and powered on the spline.  Each cubicle consists of:

  • 24" x 30" worksurface
  • 36" x 36" corner worksurface
  • 24" x 42" worksurface
  • 18" x 24" worksurface
  • 30"x 39" spanner worksurface
  • 24" Kiosk tower which includes a coat closet, closed door bookcase and a F/F pedestal
  • B/F mobile pedestal

Manufacturer: Haworth
Series: Premise
Size: Other
Quantity Available: 22

Additional photos available

W3640 — Steelcase Avenir Workstations

These Steelcase Avenir workstations measure 6' x 6' with 65" tall panels.  The panels are powered down the spline.  The fabric is Steelcase finish code F001, Firenze Reverse Tranquille.  The paint is 4700, Warm White.  Each cubicle consists of:
  • 100 series B/B/F pedestal
  • 42" 800 series two drawer lateral file
  • (1) 72" 1/2 height shelf
  • 30" x 72" worksurface
  • 18" x 42" worksurface
These workstations were orginally configured in (2) pods of twelve

Manufacturer: Steelcase
Series: Avenir
Size: 6x6
Quantity Available: 19

Additional photos available

W3912 — Herman Miller Ethospace Workstations

These Herman Miller Ethospace workstations measure 7' x 6'.  The panels are 62" along the spline winging down to 54" and then 38" on the aisle.  The spline panels are powered with standard 8 wire 4 circuit.  Each workstation consists of:

  • 30" x 72" primary worksurface with an optional corner wedge
  • 24" x 54" return
  • 20" "V" style free standing B/B/F pedestal
  • 42" binder bin (C Style)
  • 42" shelf

The fabric on the interior of the panels is Herman Miller finish code 2M06, Silkworm Jasmine.  The fabric on the exterior of the panels is 2M03, Silkwork Saffron.  The laminate is 1X, Vanilla Fiber.   The workstations were originally configured in (7) pods of six, (4) bullpen style pods of four, (2) pods of two, (1) run of three and a single.






Manufacturer: Herman Miller
Series: Ethospace
Size: 7x6
Quantity Available: 18



Charlotte, NC
P (704) 521-9328
F (888) 268-2120

Chicago, IL
Michigan City, IN 46360
P (219) 879-3665
F (219) 872-7665

Holyoke, MA
56 Canal Street
Holyoke, MA, 01040
P (413) 315-6777
F (413) 315-6278

New York, NY
80 Wall Street
Suite 814
New York, NY 10005
P (212) 871-0055
F (212) 871-0082

Philadelphia, PA
P (856) 786-2229
F (856) 786-2011